Results 1 to 15 of 15
  1. #1
    Junior Member
    Join Date
    Oct 2012
    Posts
    736


    To have any ideas,


    I got this problem in my iphone 3g, change pm ic, usb flex, make a jumper, change battery, usb cable, charger... but still no luck.


    Maybe you can to be helped me upload the possible solution to this problem.


    Thanks.


    WBR,


    Richello baring

  2. #2
    Junior Member
    Join Date
    Oct 2012
    Posts
    1,704
    you try to restore sir?

  3. #3
    Quote:

    SANTELMO
    you try to restore sir?
    i tried but still same... anyway thanks

  4. #4
    Quote:

    richello baring
    To have any ideas,


    I got this problem in my iphone 3g, change pm ic, usb flex, make a jumper, change battery, usb cable, charger... but still no luck.


    Maybe you can to be helped me upload the possible solution to this problem.


    Thanks.


    WBR,


    Richello baring
    It is empty.

    May be something is shorting check between VBAT & GND on bord.

  5. #5
    Junior Member
    Join Date
    Oct 2012
    Posts
    1,729
    Quote:

    Wites
    It is empty.

    May be something is shorting check between VBAT & GND on bord.
    I check the resistance between v+/v- but it it normal no resistance leak.


    thanks for reply..

  6. #6
    Quote:

    richello baring
    I check the resistance between v+/v- but it it normal no resistance leak.


    thanks for reply..
    Try this no charging solution[Only registered and activated users can see links. ]

    Check 0ohm resistor if bad make jumper.

  7. #7
    Junior Member
    Join Date
    Oct 2012
    Posts
    1,729
    Quote:

    Wites
    Try this no charging solution[Only registered and activated users can see links. ]

    Check 0ohm resistor if bad make jumper.
    where is the image? can you upload it again?

  8. #8
    Junior Member
    Join Date
    Oct 2012
    Posts
    1,762
    Quote:

    richello baring
    where is the image? can you upload it again?
    Sorry here it is [Only registered and activated users can see links. ]

  9. #9
    Junior Member
    Join Date
    Oct 2012
    Posts
    1,743
    Quote:

    Wites
    Sorry here it is [Only registered and activated users can see links. ]
    thank you my friend but unfortunately i made that jumper but still wont work...

  10. #10
    Junior Member
    Join Date
    Oct 2012
    Posts
    1,729
    Try Along with charger inserted,reboot it holding power & home button until it goes blank,if not to be helped try Along with recboot or tinyumbrela to enter recovery mode then kick out of recovery mode & try to charge again.

  11. #11
    Junior Member
    Join Date
    Oct 2012
    Posts
    1,704
    Quote:

    Wites
    Try Along with charger inserted,reboot it holding power & home button until it goes blank,if not to be helped try Along with recboot or tinyumbrela to enter recovery mode then kick out of recovery mode & try to charge again.
    i also tried this and restore Along with orig firmware but still the same... not working for me.

  12. #12
    Junior Member
    Join Date
    Oct 2012
    Posts
    1,807
    Quote:

    richello baring
    i also tried this and restore Along with orig firmware but still the same... not working for me.
    Have you tried to replace charging ic or charging coil?

  13. #13
    Quote:

    Wites
    Have you tried to replace charging ic or charging coil?
    tried it already. maybe there is something wrong Along with the small capacitors and resistors but i want exact location for me to easily identify.

  14. #14
    Junior Member
    Join Date
    Oct 2012
    Posts
    1,766
    Quote:

    richello baring
    tried it already. maybe there is something wrong Along with the small capacitors and resistors but i want exact location for me to easily identify.
    I will try to to be helped you.

  15. #15
    Junior Member
    Join Date
    Oct 2012
    Posts
    1,807
    Quote:

    richello baring
    tried it already. maybe there is something wrong Along with the small capacitors and resistors but i want exact location for me to easily identify.
    Measure voltage both pads of charging coil Along with charger inserted.

    And post how much it have.

 

 

Similar Threads

  1. iphone 3gs not full charging - this hardware issue ?
    By 000qrocusw in forum iPhone problems and solutions
    Replies: 2
    Last Post: 01-13-2013, 05:07 AM
  2. Replies: 6
    Last Post: 10-02-2012, 04:28 PM
  3. Replies: 5
    Last Post: 09-26-2012, 10:35 AM
  4. Replies: 0
    Last Post: 09-25-2012, 01:46 AM
  5. Replies: 2
    Last Post: 09-11-2012, 04:43 AM

Visitors found this page by searching for:

iphone 5 charging problem indicator full

iphone 4 charging indicator always full

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
 
Top